Isspro R82222 User Manual download pdf

PERFORMAX

Form No. IS160 (Rev. A 03/11/2008)

ISSPRO, INC.



2515 N.E. Riverside Way



Post Office Box 11177



Portland, Oregon 97211-1899

503-288-4488



800-888-8065



Fax: 503-249-2999

www.isspro.com

FRONT AXLE TEMPERATURE GAUGE AND SENSOR

INSTRUCTIONS

Models: R43522 R52522 R53522 R59522 R68522 R69522 R82522

Note: Can not be used on systems that contain a Performax Fuel Level Gauge

 Disconnect batteries. Do not reconnect battery power until system is

fully configured to avoid risk of shock or fire.



Install Electronic Signal Processor (ESP) and ESP harness according to

instructions.

I C O N K E Y

 CAUTION

 Tools may be required

 Shown in picture

 Connect the Temperature Sensor Harness to the ESP Harness as follows:

a. Remove plugs from cavities 1 and 2 of connector D (brown) of the ESP.

b. Using a pair of needle nose pliers, pull the orange wedge lock out of connector D.

c. Insert the terminal from the black wire (thermistor ground) into cavity 2 of connector D on

the ESP, pushing until it snaps into connector D.

d. Insert the terminal from the white wire (thermistor signal) into cavity 1 of connector D on the

ESP, pushing it until it snaps in place.

e. Note: Terminals will be close to flush with the top of the connector when fully seated.

f. Press the orange wedge lock back into the brown connector.

g. A firm pull of the wire will confirm whether they are properly seated.

h. Push the orange wedge lock back into position. If any of the wires are not fully seated, the

wedge lock will not insert into position.

i. Reconnect connector D (brown) to the ESP.

Figure 1: Connector D top and bottom

view. Shown with plugs and wedge-lock

installed.

Figure 2: Remove plugs and wedge-lock as

shown. Wedge-lock is replaced once wires are

positioned properly.

Find a location where front axle temperature can be measured such as in the drain plug (ISSPRO

makes a replacement ½”-20 drain plug which includes a ⅛” NPTF port, R78899), or drill and tap a

hole.

1 2

PERFORMAX 1

Summary of Contents

Page 1 - PERFORMAX

PERFORMAX Form No. IS160 (Rev. A 03/11/2008) ISSPRO, INC.  2515 N.E. Riverside Way  Post Office Box 11177  Portland, Oregon 97211-1899 503-288-

Page 2

Form No. IS160 (Rev. A 03/11/2008) ISSPRO, INC.  2515 N.E. Riverside Way  Post Office Box 11177  Portland, Oregon 97211-1899 503-288-4488  800-

Related models: R59222 | R53222 | R52222 | R43222 |

Comments to this Manuals

No comments

Isspro R82222 User Manual

Browse online or download User Manual for Sensors Isspro R82222. ISSPRO R82222 User Manual

Summary of Contents

Related models: R59222 | R53222 | R52222 | R43222 |

Comments to this Manuals

Related products and manuals for Sensors Isspro R82222